IIITDM Kancheepuram Institutional Repository

-- Preserving Knowledge, Empowering Innovation --

The IIITDM Kancheepuram Institutional Repository is a digital archive designed to collect, preserve, and showcase the intellectual and creative outputs of the institute. it serves as a centralized access point for scholarly publications, theses, research papers, and other academic resources produced by faculty, researchers, and students.

This repository aims to promote open access to the institute’s academic contributions, enhance visibility, and support long-term preservation of research content. Through this initiative, IIITDM Kancheepuram strengthens its commitment to fostering innovation, collaboration, and knowledge sharing within the academic and research community.

Indian Institute of Information Technology, Design and Manufacturing (IIITDM) Kancheepuram is an Institute of National Importance established to promote excellence in engineering education and research with a focus on design and manufacturing. The institute integrates information technology with product design and manufacturing processes to nurture innovation, creativity, and entrepreneurship, preparing students to meet the evolving demands of industry and society.

IIITDM Kancheepuram promotes a strong research culture that bridges academia and industry. With a focus on design-driven engineering and emerging technologies, the institute advances innovation in areas such as smart manufacturing, embedded systems, and robotics, making its research accessible to the global community through this repository.

Communities in IIITDM-IR

Select a community to browse its collections.

Now showing 1 - 5 of 5

Recent Submissions

  • Item type: Item ,
    Investigation on Trench Gate and SOI Nanosheet FET Architectures for its Leakage Suppression, Temperature-stable Operation and Variability
    (2026-05) Muhammed T, Ashiq
    This report details the design and analysis of a 3-stack horizontal Nano-sheet Field Effect transistor (NSFET) with an integrated Trench Gate (TG) structure and NSFET mount on a SOI BOX layer. These architectures effectively suppress substrate parasitic leakage currents and enhance overall device performance. In the TG-NSFET, the effective gate length (LG,EFF) of the parasitic substrate transistor is increased. The SOI NSFET employs a Silicon-on-Insulator substrate with a Buried Oxide layer that physically and electrically isolates the active region from bulk completely eliminating the parasitic leakage path at its source. TCAD simulations confirm a seven-order reduction in leakage current along with a significantly improved Ion/Ioff ratio. To evaluate device reliability under the Self-Heating Effect (SHE), TCAD simulations were performed on the proposed Trench Gate (TG) and SOI NSFET architectures. The analysis showed temperature rise in the channel region for both devices, with the SOI structure exhibiting higher distributed heating from source to drain due to low thermal conductivity of the BOX layer. Zero-Temperature Coefficient (ZTC) analysis was carried out to identify operating bias points where important parameters such as drain current and delay show minimal variation with temperature. These studies help in understanding the suitability of both architectures for reliable analog and digital applications. In addition to electrical performance analysis, statistical variability assessment of the proposed Trench Gate NMOS device was carried out using the Sentaurus TCAD sIFM framework. The impact of Random Dopant Fluctuation (RDF) and Oxide Thickness Variation (OTV) on threshold voltage and drain current characteristics was investigated. The results demonstrate that RDF introduces dominant variability compared to oxide thickness fluctuations, while the proposed device structure maintains improved electrostatic control and reduced sensitivity to process-induced variations.
  • Item type: Item ,
    Exploring FPGA-Based Quantum Emulator
    (2026-05) Jerusha, Delphina
    This paper introduces a scalable quantum emulator design with its development and physical hardware implementation on an FPGA with emphasis on the Draper Adder algorithm. With current limitations on physical quantum computing hardware in terms of a restricted number of qubits and relatively high error rates, classical emulation becomes essential to design quantum algorithms. It has been shown that the Draper algorithm can perform binary addition solely in the quantum phase domain, leveraging both the Quantum Fourier Transform (QFT) and Inverse QFT (IQFT), without employing any ancillary (carry) qubits. This paper explores the development of an architecture which can perform quantum addition of up to 15 bits using C++ in the Xilinx Vitis High Level Synthesis (HLS) environment and interfacing this architecture to the Zynq Processing System. The physical implementation and verification was done using the PYNQ-Z2 FPGA board and Jupyter Notebook environment to feed in test vectors to the programmable logic. Parallelization techniques such as loop unrolling, pipelining, and array partitioning were leveraged to parallelize phase computation operations. The post-implementation analysis showed the high resource cost of emulation of quantum states, where the highly parallel architecture required 204 specialized DSP slices with an utilization rate of 92.73%. The designed architecture satisfies all timing requirements, having a synthesized clock of 7.297 ns out of the target clock frequency of 10.00 ns with on-chip total power of 2.032 W. Despite successful inner-loop pipelining, analysis shows a computational latency of about 39.6 million cycles due to sequential outer loops. This paper proposes a classically verified emulation architecture that will pave the way for building quantum algorithms in the future, with applications to protocols such as Shor’s algorithm.
  • Item type: Item ,
    Radiation Analysis of p-GaN HEMTs Under Total Ionizing Dose and Single-Event Effects.
    (2026-05) Saranya, Bandaru
    In this work, an e-mode p-Gate HEMT with a gate FP is designed and analyzed using a physics-based TCAD simulator for radiation-prone applications[1]. The electrical characteristics of the device verify the gate control, large transconductance, and electric field redistribution with the field plate. The radiation reliability of the device is analyzed under TID, SET, SEB, and alpha particle irradiation conditions. Gamma irradiation is modeled using a field-dependent carrier generation approach to investigate radiation-induced trap formation, threshold voltage shift, and drain current variation. Heavy-ion induced SET analysis employs a Gaussian spatial–temporal charge deposition model to evaluate transient drain current response for different LET values, strike locations, and strike times. SEB analysis under high drain bias conditions demonstrates sustained current behavior due to carrier multiplication near the drain-side high electric field region. In addition, alpha-particle irradiation is analyzed to study transient response under comparatively lower energy deposition conditions. The results show that heavy ions produce stronger transient disturbances than alpha particles due to higher charge deposition and carrier generation. The device operation in a state of moderate radiation exposure is ensured, proving the efficiency of the management of the electric field and structural optimization. This research introduces a complete framework for assessing cumulative and single-event effects in p-GaN HEMTs.
  • Item type: Item ,
    MFIS FeFET Gate Stack : Synapse, Memory Window and Reliability
    (2026-05) Shiram, Utkarshha Bharat
    This work focuses on improving the electrical performance, synaptic behavior, and reliability of Ferroelectric Field Effect Transistor (FeFET) devices using different ferroelectric materials and gate stack configurations. The devices were designed and analyzed using Synopsys Sentaurus TCAD with Hf0.5Zr0.5O2 (HZO) and Hf0.95Al0.05O2 (HAO) ferroelectric materials along with SiOx, SiO2, and Al2O3 interlayers. The simulated results showed hysteresis behavior and non-volatile memory operation in MFIS and MFMIS structures with memory windows of 0.7 V and 0.97 V respectively. The FDSOI-MFIS FeFET using HZO + SiO2 showed a large memory window of 1.75 V with an ON current of 8.11 × 10−5 A and OFF current of 5.6 × 10−9 A. HAO-based structures reduced the coercive field from 1.2 MV/cm to 0.5 MV/cm, enabling lower operating voltage and improved reliability. Synaptic analysis using ±5.5 V pulses demonstrated gradual potentiation and depression characteristics suitable for neuromorphic applications. Reliability analysis using HBM, MM, CDM, and TLP stress conditions showed increased electrical stress with increasing ESD voltage up to 2000 V. TLP analysis revealed triggering, snapback behavior, and self-heating effects during ESD stress. Overall, the results demonstrate that optimization of ferroelectric materials and interlayer dielectrics significantly improves FeFET memory characteristics, synaptic behavior, and ESD reliability for future non-volatile memory and neuromorphic computing applications.
  • Item type: Item ,
    Comprehensive DFT Verification and UPF-Based Power Sequencing of an IEEE-754 Division Architecture
    (2026-05) Ranjan, Rahul
    This project presents the implementation and verification of multiple Design-for-Testability (DFT) and power-aware verification techniques used in modern VLSI systems. The work includes JTAG-based DFT verification using the IEEE 1149.1 TAP controller architecture, scan insertion and Automatic Test Pattern Generation (ATPG) analysis for stuck-at and IDDQ fault models, and Memory Built-In Self-Test (MBIST) verification for memory testing. In addition, UPF-based power-aware verification was performed on an IEEE-754 Dhwajanka floating-point division module to analyze power-domain behavior, signal integrity, and low-power design challenges during power gating. Simulation results validated the functionality, fault coverage, and power-aware behavior of the implemented methodologies. For the IEEE-754 Dhwajanka floating-point division module, the Serial-to-Parallel sub module can be turned OFF for up to 40% of the total time required for a single data transaction. This optimization results in a power saving of up to 61.8% in the Serial-to-Parallel block. Furthermore, the achieved stuck-at and IDDQ ATPG test coverage for the design are 98.78% and 77.45%, respectively.